Administrator Guide
414 | Administration Dell Networking W-ClearPass Policy Manager 6.5 | User Guide
Service
Parameters
Description
NOTE: The EAP-MD5 authentication type is not supported if you use the Dell Networking W-
ClearPass Policy Manager in the FIPS mode.
SNMP v3 Trap
Privacy
Protocol
Specifies the SNMP v3 Privacy protocol for traps. Must be one of DES_CBC, AES_128, or
empty (to disable privacy).
NOTE: The DES_CBC privacy protocol is not supported if you use the Dell Networking W-
ClearPass Policy Manager in the FIPS mode.
SNMP v3 Trap
Authentication
Key
Specifies the SNMP v3 authentication key and privacy key for incoming traps.
SNMP v3 Trap
Privacy Key
Device Info
Poll Interval
Specifies the time (in minutes) between polling for device information.
WebAuthService
Max time to
determine
network
device where
client is
connected
In some usage scenarios where the web authentication request does not originate from the
network device. Policy Manager has to determine the network device to which the client is
connected through an out-of-band SNMP mechanism. The network device deduction can
take some time. This parameter specifies the maximum time to wait for Policy Manager to
determine the network device to which the client is connected.
PostureService
Audit Thread
Pool Size
Specifies the number of threads to use for connections to audit servers.
Audit Result
Cache
Timeout
Specifies the time (in seconds) for which audit result entries are cached by Policy Manager.
Audit Host
Ping Timeout
Specifies the number of seconds for which Policy Manager pings an end-host before giving
up and deeming the host to be unreachable.
Table 236:
Service Parameters - ClearPass Network Services (Continued)
ClearPass System Services Options
You can use the ClearPass system service parameters for PHPconfiguration and for http traffic flowing
through a proxy server. Dell Networking W-ClearPass Policy Manager relies on an http connection for Dell W-
ClearPass update portal to download the latest information for posture services.