Administrator Guide

424 | Administration Dell Networking W-ClearPass Policy Manager 6.5 | User Guide
The following figure displays the System Monitoring tab:
Figure 396: System Monitoring Tab
The following table describes the System Monitoring tab parameters:
Parameter Description
System
Location
Specify the location of the Dell Networking W-ClearPass Policy Manager appliance.
System
Contact
Specify the contact information of the Dell Networking W-ClearPass Policy Manager appliance.
SNMP Configuration
Version Specify the SNMP version from the options V1, V2C, or V3. The GUI options on this page vary
based on the SNMP version selected.
Community
String
Enter and re-enter the community string for sending traps. This is applicable only for SNMP V1
and V2C versions
Username Specify the user name to use for SNMP v3 communication. This field is available only if you
selected the V3 as the SNMP version in the Version field.
Security Level Select any of the following options:
l NOAUTH_NOPRIV (no authentication or privacy) - If you select this security level, only the SHA
authentication protocol is available.
l AUTH_NOPRIV (authenticate, but no privacy) - If you select this security level, the MD5 and
SHA authentication protocols are available.
Table 243: System Monitoring tab Parameters