Administrator Guide

458 | Administration Dell Networking W-ClearPass Policy Manager 6.5 | User Guide
Service Log Configuration
The following figure displays the Service Log Configuration tab:
Figure 430: Log Configuration - Service Log Configuration Tab
The following table describes the Service Log Configuration tab parameters:
Parameter Description
Select Server Specify the server for which you want to configure logs. All nodes in the cluster appear in
the drop-down list.
Select Service Specify the service for which you want to configure logs.
Module Log Level
Settings
Select the check box to set the log level for each module individually (listed in decreasing
level of verbosity. For optimal performance you must run Policy Manager with log level set
to ERROR or FATAL):
l DEBUG
l INFO
l WARN
l ERROR
l FATAL
If this option is disabled, then all module level logs are set to the default log level.
Default Log Level This drop-down list is available if the Module Log Level Settings option is disabled. This
sets the default logging level for all modules. Available options include the following:
l DEBUG
l INFO
l WARN
l ERROR
l FATAL
Table 263: Log Configuration - Service Log Configuration tab Parameters