Administrator Guide

Exporting All SNMP Trap Servers
This link exports all configured SNMP Trap Receivers. To export all SNMP trap servers:
1. Navigate to Administration > External Servers > SNMP Trap Receivers.
2. Click the Export All link on the top right section of the page. Enter the details based on Table 267.
3. Click Export.
4. Enter the XML file name in the Save As dialog box.
5. Click Save.
The following figure displays the Export to file pop-up:
Figure 444: Export to file Pop-up
The following table describes the Export to file parameters:
Parameter Description
Export file with password
protection
Choose Yes to export the file with password protection.
Secret Key Enter the secret key.
Verify Secret Re-enter the secret key.
Table 267: Export to file Parameters
Exporting an SNMP Trap Server
To export a single SNMP trap server:
1. Navigate to Administration > External Servers > SNMP Trap Receivers.
2. Select the Host Address from the list of check boxes and click Export. Enter the details based on Table
268.
3. Enter the name of the XML file in the Save As dialog.
4. Click Save.
Dell Networking W-ClearPass Policy Manager 6.5 | User Guide Administration | 469