Administrator Guide

516 | Administration Dell Networking W-ClearPass Policy Manager 6.5 | User Guide
Figure 484: Add Endpoint Context Server - Server (Palo Alto Networks Panorama) Tab
You can add more than one endpoint context server of the same type. For example, you can add more than one
AirWatch endpoint context server.
The following table describes the Add Endpoint Context Server - Server (Palo Alto Networks Panorama) tab
parameters:
Parameter Description
Select Server Type Choose Palo Alto Networks Panorama from the drop-down list.
Server Name Enter a valid server name. You can enter an IP address or hostname.
Server Base URL Enter the server base URL in the following format: https://{server_ip}
/api/?type=keygen&user={username}&password={password}
Username Enter the username.
Password Enter and verify the password.
Verify Password
Username Transformation Choose one of the following options:
l None - Do not use any username transformation.
l Prefix NETBIOS name - Prefix NETBIOS name in UID updates.
l Use Full Username - Use full username in UID updates.
GlobalProtect Enable to send HIP report to firewall. GlobalProtect license should be
enabled on firewall for this to work.
Table 303:
Add Endpoint Context Server - Server (Palo Alto Networks Panorama) Tab Parameters