Administrator Guide

574 | Command Line Interface Dell Networking W-ClearPass Policy Manager 6.5 |User Guide
* *
********************************************************
Continue? [y|Y]: y
INFO: Restarting network services
INFO: Successfully applied MTU settings
Example 3
The following example displays the settings of the mtu management and data port interfaces:
[appadmin]# show ip
===========================================
Device Type : Management Port
-------------------------------------------
IPv4 Address : 10.2.xx.86
Subnet Mask : 255.255.255.0
Gateway : 10.2.xx.1
IPv6 Address : 2607:f0d0:1002:0011:0000:0000:0000:0002
Subnet Mask : ffff:ffff:ffff:ffff:0000:0000:0000:0000
Gateway : 2607:f0d0:1002:0011:0000:0000:0000:0001
Hardware Address : 00:0C:29:70:27:40
MTU : 1499
===========================================
Device Type : Data Port
-------------------------------------------
IPv4 Address : <not configured>
Subnet Mask : <not configured>
Gateway : <not configured>
IPv6 Address : fe80:0000:0000:0000:020c:29ff:fe70:274a
Subnet Mask : ffff:ffff:ffff:ffff:0000:0000:0000:0000
Gateway : fe80:0000:0000:0000:020c:29ff:fe70:2741
Hardware Address : 00:0C:29:70:27:4A
MTU : 1498
===========================================
DNS Information
-------------------------------------------
Primary DNS : 10.2.xx.3
Secondary DNS : 10.1.xx.50
Tertiary DNS : 10.1.xx.200
===========================================
timezone
Use the timezone command to configure time zone interactively.
Syntax
configure timezone
Example
The following example configures the timezone interactively:
[appadmin]# configure timezone
configure timezone
*********************************************************
* WARNING: When the command is completed Policy Manager services *
* are restarted to reflect the changes. *
*********************************************************
Continue? [y|Y]: y