Administrator Guide

656 | OnGuard Dissolvable Agent Dell Networking W-ClearPass Policy Manager 6.5 |User Guide
Use the following steps to configure the OnGuard Dissolvable Agent in Native agents only mode:
1. Select the Policy-initiated - An enforcement policy will control a change of authorization option
from the drop-down list in the Login Method field. The following figure displays the policy-initiated login
method in the Web Login Editor page:
Figure 547: Policy-initiated Login Method
2. Select the Require a successful OnGuard health check option in the Health Check field. If you select
this field, the guest needs to pass a health check before accessing the network. Select the Native agents
only mode in the Client Agents field:
Figure 548: Native Agents Only Mode
End-to-end flow in Native Agents Only Mode
The following steps describe the end-to-end flow of the OnGuard Dissolvable Agent running on the Native
agents only mode:
1. You are redirected to the ClearPass Guest portal where you can download the native agent installer. Run the
Native Agent Installer after accepting the terms and conditions for collecting end point posture assessment
scan checks and performing remediation actions.