Administrator Guide

The following table describes the System Event Details parameters:
Parameter Description
Source Displays the source of the event. For example, AdminUI, RADIUS, and SnmpService.
Level Displays the level of the event from the following options:
l INFO
l WARN
l ERROR
Category Displays the category of the event. For example, Request, Authentication, and System.
Action Displays the action of the events. For example, Success, Failed, Unknown, and None.
Timestamp
Displays the date and time when the event occurred.
Description Displays additional information about the event.
Table 25: System Event Details Page Parameters
Data Filters
The Data Filters table on the Monitoring > Data Filters page provides a way to filter data (limit the number
of rows of data shown by defining custom criteria or rules) that is shown in the following components in Policy
Manager:
l Live Monitoring: Access Tracker on page 43
l Syslog Export Filters on page 475
l Live Monitoring: Analysis and Trending on page 68
l Live Monitoring: Accounting on page 52
Policy Manager is preconfigured with the following data filters:
l All Requests - Shows all requests (without any rows filtered).
l ClearPass Application Requests - Shows all Application session log requests.
l Failed Requests - Shows all authentication requests that were rejected or failed.
l Guest Access Requests - Shows all requests - RADIUS or Web Authentication - where the user was
assigned with the built-in role Guest.
l Healthy Requests - Shows all requests that were deemed healthy by Policy Manager.
l RADIUS Requests - Shows all RADIUS requests.
l Successful Requests - Shows all authentication requests that were successful.
l TACACS Requests - Shows all TACACS requests.
l Unhealthy Requests - Shows all requests that were not deemed healthy by Policy Manager.
l WebAuth Requests - Shows all Web Authentication requests (requests originated from the Dell Guest
Portal).
Dell Networking W-ClearPass Policy Manager 6.5 | User Guide Monitoring | 79