Deployment Guide

5. Click Upload Certificate to save your changes.
If additional certificates are required, you will remain at the same page. Check the message displayed above the form
to determine which certificate or type of file must be uploaded next. When the trust chain is complete, it will be
displayed. This completes the initialization of the certificate authority.
The Trust Chain and Uploading Certificates for the CA
The Certificate Authority Trust Chain page is used to view the certificate authority’s current trust chain, or to
upload a new certificate in the trust chain when configuring a certificate authority.
To view the Certificate Authority’s trust chain, go to Onboard > Certificate Authority Settings and click the Trust
Chain link for a certificate. The Certificate Authority Trust Chain page is displayed. This page shows a graphical
representation of the certificates that make up the trust chain.
The first certificate listed is the root certificate. Root certificates are always self-signed and are explicitly trusted by
clients.
Each additional certificate shown is an intermediate certificate. The last certificate in the list is the signing
certificate that is used to issue client and server certificates.
To view the properties of a certificate in the trust chain, click the Show certificate link. The Certificate
Information view opens.
Dell Networking W-ClearPass Guest 6.1 | Deployment Guide Onboard | 93