Users Guide

Parameter Description
Name Enter the name of the profile. The name is displayed in the Name column on
the Configuration > Enforcement > Profiles page.
Description Enter a description of the profile. The Description is displayed in the
Description column on the Configuration > Enforcement > Profiles page.
Type Agent. The value field is populated automatically.
Action Disabled. Enabled only when RADIUS type is selected. Click to Accept, Deny
or Drop to define the action taken on the request.
Device Group
List:
Select a Device Group from the drop-down list. The list displays all configured
Device Groups.
All configured device groups are listed in the Device Groups page:
Configuration > Network > Device Groups.
After you add one or more device group(s), you can select a group and take
one of the following actions:
l Click Remove to delete the selected Device Group List entry.
l Click View Details to see the device group parameters.
l Click Modify to change the parameters of the selected device group.
Add new Device
Group
To add a new device group, click the Add new Device Group link and see
Adding and Modifying Device Groups on page 285
.
Table 127: Add Agent Enforcement Profile tab Parameters (Continued)
Attributes tab
Figure 237: Agent Enforcement Attributes tab
Attribute Parameter
Attribute Name
Select one of the following attribute names:
l Bounce Client
l Message
l Session Timeout (in seconds)
Attribute Value
The Attribute Value settings depend on the selected Attribute Name.
Table 128: Agent Enforcement Attributes tab Parameters
Dell Networking W-ClearPass Policy Manager 6.3 | User Guide Enforcement | 249