Users Guide

264 | Enforcement DellNetworking W-ClearPassPolicy Manager 6.3 |User Guide
Table 141: Filter ID Based Enforcement Profile tab Parameters
Parameter Description
Template: Filter ID Based Enforcement
Name: Enter the name of the profile. The name is displayed in the Name column on
the Configuration > Enforcement > Profiles page.
Description: Enter a description of the profile. The Description is displayed in the
Description column on the Configuration > Enforcement > Profiles page.
Type: RADIUS. The field is populated automatically.
Action: Enabled. Click Accept, Reject, or Drop to define the action taken on the
request.
Device Group
List:
Select a Device Group from the drop-down list. The list displays all configured
Device Groups.
All configured device groups are listed in the Device Groups page:
Configuration > Network > Device Groups.
After you add one or more device group(s), you can select a group and take
one of the following actions:
l Click Remove to delete the selected Device Group List entry.
l Click View Details to see the device group parameters.
l Click Modify to change the parameters of the selected device group.
Add new Device
Group:
To add a new a device group, click the Add new Device Group link and see
Adding and Modifying Device Groups on page 285
.
Attributes tab
Figure 261: Filter ID Based Enforcement Profile Attributes tab
Parameter Description
Type:
Select one of the following attribute types:
l Radius:Aruba
l Radius:IETF
l Radius:Cisco
l Radius:Microsoft
l Radius:Avenda
For more information, see "RADIUS Namespaces" on page 454
Table 142: Filter ID Based Enforcement Profile Attributes tab Parameters