Users Guide

270 | Enforcement DellNetworking W-ClearPassPolicy Manager 6.3 |User Guide
Parameter Description
Value:
The options displayed for the Value Attribute depend on the RADIUS CoA
Template selected and the Type Attribute that were selected.
Type: RADIUS_CoA. The field is populated automatically.
Action: Disabled.
Device Group
List:
Select a Device Group from the drop-down list. The list displays all configured
Device Groups.
All configured device groups are listed on the Device Groups page:
Configuration > Network > Device Groups.
After you add one or more device group(s), you can select a group and take
one of the following actions:
l Click Remove to delete the selected Device Group List entry.
l Click View Details to see the device group parameters.
l Click Modify to change the parameters of the selected device group.
Add new Device
Group
To add a new a device group, click the Add new Device Group link and see
Adding and Modifying Device Groups on page 285
.
Table 149: Radius Change of Authorization (CoA) Profile tab Parameters (Continued)
Attributes tab
Figure 269: Radius Change of Authorization (CoA) Attributes tab
Parameter Description
RADIUS CoA
Template:
Select from:
l Cisco-Disable-Host-Port
l Cisco - Bounce-Host-Port
l Cisco - Reauthenticate-Session
l HP - Change-VLAN
l HP - Generic-CoA
l Aruba - Change-User-Role
l IETF - Terminate-Session-IETF
l Aruba - Change-VPN-User-Role
l IETF- Generic-CoA-IETF
Table 150: Radius Change of Authorization (CoA) Attributes tab Parameters