Users Guide

278 | Enforcement DellNetworking W-ClearPassPolicy Manager 6.3 |User Guide
Figure 279: Add Enforcement Policy (Enforcement tab)
Parameter Description
Name/Description Freeform label and description.
Type Select: RADIUS, TACACS+, WebAuth (SNMP/CLI)/CoA or Application. Based on this selection,
the Default Profile list shows the right type of enforcement profiles in the drop-down list (See
Below).
NOTE: Web-based Authentication or WebAuth (HTTPS) is the mechanism used by
authentications performed via a browser, and authentications performed via Dell W-OnGuard.
Both SNMP and CLI (SSH/Telnet) based Enforcement Profiles can be sent to the network device
based on the type of device and the use case.
Default Profile An Enforcement Policy applies Conditions (roles, health and time attributes) against specific
values associated with those attributes to determine the Enforcement Profile. If none of the rules
matches, Policy Manager applies the Default Profile.
Click Add new Enforcement Profile to add a new profile (This is integrated into the flow. After you
are done creating the profile, Policy Manager brings you back to the current page/tab.)
Table 159: Add Enforcement Policy (Enforcement tab)
In the Rules tab, click New Rule to display the Rules Editor:
Figure 280: Add Enforcement Policy (Rules Tab)