Users Guide

Figure 283: SNMP Read/Write Settings tabs
Figure 284: SNMP Read/Write Settings tabs - SNMP v3 Details
Parameter Description
Allow SNMP
Read/Write
Toggle to enable/disable SNMP Read/Write.
Default VLAN
(SNMP Write
only)
VLAN port setting after SNMP-enforced session expires.
SNMP
Read/Write
Setting
SNMP settings for the device.
Community
String (SNMP
v2 only)
Force Read
(SNMP v1
and v2 only)
Enable this setting to ensure that all CPPM nodes in the cluster read SNMP information
from this device regardless of the trap configuration on the device. This option is
especially useful when demonstrating static IP-based device profiling because this does
not require any trap configuration on the network device.
Read ARP
Table Info
Enable this setting if this is a Layer 3 device, and you intend to use the ARP table on this
device as a way to discover endpoints in the network. Static IP endpoints discovered this
way are further probed via SNMP to profile the device.
Table 163: SNMP Read/Write Settings tabs
Dell Networking W-ClearPass Policy Manager 6.3 | User Guide Network Access Devices | 283