Users Guide
Figure 329: System Tab
Parameter Description
Hostname Hostname of Policy Manager appliance. It is not necessary to enter the fully qualified domain
name here.
Policy Manager
Zone
Select a previously configured timezone from the drop-down list. Click on the Policy Manager
Timezone link to add and edit timezones from within this page.
Enable Profile Enable the profile to perform endpoint classifications.
Enable
Performance
Monitoring
Enable the server to perform performance monitoring.
Enable Insight Enable the Insight reporting tool on this node.
NOTE:
l When the admin enables the checkbox for Insight on a node in cluster, Admin will
automatically update the [Insight Repository] configuration to point to the management IP of
that server.
l When enabling the checkbox for other servers in the cluster, they will be added as backups
for the same auth source.
l The order of the primary and backup servers in the [Insight Repository] is the same in which
the user enables Insight on the server.
Enable as Insight
Master
In a cluster environment, you can specify that the current server is also the Insight Master.
NOTE: This option is only available if Enable Insight is selected.
DHCP Span Port If desired, specify the port number for DHCPspanning.
Management
Port: IP Address
Management interface IP address. You access the Policy Manager UI via the management
interface.
Management
Port: Subnet
Mask
Management interface Subnet Mask
Table 200:
Server Configuration System tab
Dell Networking W-ClearPass Policy Manager 6.3 | User Guide Administration | 329