Users Guide
Network Tab
Navigate to the Network tab to create GREtunnels and VLANs related to guest users and to control what applications
have access to the node.
Figure 344: Network Interfaces Tab
Creating GREtunnels
The administrator can create a generic routing encapsulation (GRE) tunnel. This protocol can be used to create a
virtual point-to-point link over standard IP network or the internet.
Navigate to the Network tab and click Create Tunnel.
Figure 345: Create Tunnel page
Parameter Description
Display Name Optional name for the tunnel interface. This name is used to identify the tunnel in the list
of network interfaces.
Local Inner IP Local IP address of the tunnel network interface.
Remote Outer
IP
IP address of the remote tunnel endpoint.
Remote Inner
IP
Remote IP address of the tunnel network interface.
Enter a value here to automatically create a route to this address through the tunnel.
Create/Cancel Commit or dismiss changes.
Table 211:
Create Tunnel Page Parameters
Creating VLANs
Navigate to the Network tab and click Create VLAN.
Dell Networking W-ClearPass Policy Manager 6.3 | User Guide Administration | 345