Users Guide

Adding an SNMP Trap Server
To add a trap server, navigate to Administration > External Servers > SNMP Trap Receivers and select the Add
SNMP Trap Server link.
Figure 371: Add SNMP Trap Server
Parameter
Description
Host Address: Trap destination hostname or ip address.
NOTE: This server must have an SNMP trap receiver or trap viewer installed.
Description: Freeform description.
SNMP Version: V1 or V2C.
Community String /Verify : Enter and re-enter the community string for sending the traps.
Server Port: Port number for sending the traps; by default, port 162.
NOTE: Configure the trap server firewall for traffic on this port.
Table 224: Add SNMPTrap Server fields
Exporting all SNMP Trap Servers
To export all SNMP trap servers, navigate to Administration > External Servers > SNMP Trap Receivers and select
the Export SNMP Trap Server link. This link exports all configured SNMP Trap Receivers. Click Export Trap
Server. Enter the XML file name in the Save As dialog.
Exporting a Single SNMP Trap Server
To export a single SNMP trap server, navigate to Administration > External Servers > SNMP Trap Receivers. Select
the SNMP Trap server that you want to export and click the Export button in the lower-right corner of the page. Enter
the name of the XML file Save As dialog.
Importing an SNMP Trap Server
To import a trap server, navigate to Administration > External Servers > SNMP Trap Receivers and select the
Import SNMP Trap Server link.
Dell Networking W-ClearPass Policy Manager 6.3 | User Guide Administration | 365