Users Guide

424 | Command Line Interface Dell Networking W-ClearPass Policy Manager 6.3 |User Guide
l "drop-subscriber" on page 424
l "list" on page 424
l "make-publisher" on page 424
l "make-subscriber" on page 425
l "reset-database" on page 425
l "set-cluster-passwd" on page 425
l "set-local-passwd" on page 426
drop-subscriber
Removes specified subscriber node from the cluster.
Syntax
cluster drop-subscriber [-f] [-i <IP Address>] -s
Where:
Flag/Parameter Description
-f Force drop, even for down nodes.
-i <IP Address>
Management IP address of the node. If not
specified and the current node is a subscriber,
Policy Manager drops the current node.
-s
Do not reset the database on the dropped node.
By default, Policy Manager drops the current node
(if a subscriber) from the cluster.
Table 280: Drop-Subscriber Commands
Example
[appadmin]# cluster drop-subscriber -f -i 192.168.1.1 -s
list
Lists the cluster nodes.
Syntax
cluster list
Example
[appadmin]# cluster list
cluster list
Publisher :
Management port IP=192.168.5.227
Data port IP=None [local machine]
make-publisher
Makes this node a publisher.
Syntax
cluster make-publisher