Users Guide
464 | Error Codes, SNMP Traps, and System Events Dell Networking W-ClearPass Policy Manager 6.3 |User Guide
Code Description Type
9009 Unknown Phase2 PAC RADIUS Protocol
9010 Invalid Phase2 PAC RADIUS Protocol
9011 PAC verification failed RADIUS Protocol
9012 PAC binding failed RADIUS Protocol
9013 Session resumption failed RADIUS Protocol
9014 Cached session data error RADIUS Protocol
9015 Client does not support configured EAPmethods RADIUS Protocol
9016 Client did not send Cryptobinding TLV RADIUS Protocol
9017 Failed to contact OCSPServer RADIUS Protocol
Table 316:
CPPM Error Codes (Continued)
SNMP Trap Details
CPPM leverages native SNMP support from the UC Davis ‘net-SNMP’ MIB package to send trap notifications for the
following events.
In these trap OIDs, the value of X varies from 1 through N, depending on the number of process states that are being
checked. Details about specific OIDs associated with the processes are listed in this section.
For more information, see:
l "SNMP Daemon Trap Events" on page 464
l "CPPM Processes Stop and Start Events" on page 464
l "Network Interface up and Down Events" on page 465
l "Disk Utilization Threshold Exceed Events" on page 465
l "CPU Load Average Exceed Events for 1, 5, and 15 Minute Thresholds" on page 465
l "SNMP Daemon Traps" on page 465
l "Process Status Traps" on page 465
l "Network Interface Status Traps" on page 473
l "Disk Space Threshold Traps" on page 473
l "CPU Load Average Traps" on page 473
SNMP Daemon Trap Events
OIDs:
.1.3.6.1.6.3.1.1.5.1 ==> Cold Start
.1.3.6.1.6.3.1.1.5.2 ==> Warm Start
CPPM Processes Stop and Start Events
OIDs: