Users Guide

126 | Services Dell Networking W-ClearPass Policy Manager 6.3 |User Guide
Figure 80: Add Service Page (all options enabled)
The Add Service tab includes the following fields.
Label Description
Type Select the desired service type from the drop-down list. When working with service rules,
you can select from the following namespace dictionaries:
l Application: The type of application for this service.
l Authentication: The Authentication method to be used for this service.
l Connection: Originator address (Src-IP-Address, Src-Port), Destination address (Dest-
IP-Address, Dest-Port), and Protocol
l Device: Filter the service based on a specific device type, vendor, operating system
location, or controller ID.
l Date: Time-of-Day, Day-of-Week, or Date-of-Year
l Endpoint: Filter based on endpoint information, such as enabled/disabled, device, OS,
location, and more.
l Host: Filter based on host Name, OSType, FQDN, UserAgent, CheckType, UniqueID,
Agent-Type, and InstalledSHAs,
l RADIUS: Policy Manager ships with a number of vendor-specific namespace
dictionaries and distinguishes vendor-specific RADIUS namespaces with the notation
RADIUS:vendor (sometimes with an additional suffix for a particular device). To add a
dictionary for a vendor-specific RADIUS namespace, navigate to Administration >
Dictionaries > Radius > Import (link).
The notation RADIUS:IETF refers to the RADIUS attributes defined in RFC 2865 and
associated RFCs. As the name suggests, RADIUS namespace is only available when
the request type is RADIUS.
l Any other supported namespace. See "Rules Editing and Namespaces" on page 449
for an exhaustive list of namespaces and their descriptions.
To create new Services, you can copy or import other Services for use as is or as
templates, or you can create a new Service from scratch.
Name Label for a Service.
Description Description for a Service (optional).
Table 43: Service Page (General Parameters)