Users Guide

In the Installed Applications page, you can turn on the installed applications check and specify information about
which installed applications you want to monitor. You can take the following actions:
l Specify installed applications to monitor on a mandatory basis.
l Specify installed applications to be monitored on an optional basis.
l Specify installed applications that are never monitored.
l Specify that only the mandatory and optional applications are monitored.
Parameter Description
Remediation checks
Auto-remediation for Installed Applications health
class is not supported.
User Notification
A Remediation message having a list of applications
to install/uninstall will be displayed to end user.
Monitor Mode
In the Network Monitor (NetMon) operation mode, the
802.11 station operates as a wireless LAN (WLAN)
device that is used to monitor packets that are sent
over the WLAN media by other devices.
Applications Allowed (Mandatory)
Enter the application name as it is shown in
Add/Remove Programs.
Applications Allowed (Optional)
Enter the application name as it is shown in
Add/Remove Programs.
Allow only Mandatory and Optional Applications
Check to allow only selected applications. All
applications other than 'Allowed Applications,
including both mandatory and optional' should be
removed or uninstalled.
Table 116: Installed Applications Configuration Page
Windows Security Health Validator - OnGuard Agent
This validator checks for the presence of specific types of security applications. An administrator can use the check
boxes to restrict access based on the absence of the selected security application types.
Dell Networking W-ClearPass Policy Manager 6.3 | User Guide Posture | 233