Users Guide

270 | Enforcement DellNetworking W-ClearPassPolicy Manager 6.3 |User Guide
Generic Application Enforcement
Use this page to configure profile and attribute parameters for the Generic Application Enforcement Profile.
Profile tab
Figure 262: Generic Application Enforcement Profile tab
Parameter Description
Template: Generic Application Enforcement
Name: Enter the name of the profile. The name is displayed in the Name column on
the Configuration > Enforcement > Profiles page.
Description: Enter a description of the profile. The Description is displayed in the
Description column on the Configuration > Enforcement > Profiles page.
Type: Application. The field is populated automatically.
Action: Enabled. Click Accept or Reject to define the action taken on the request. The
Drop button is disabled.
Device Group
List:
Select a Device Group from the drop-down list. The list displays all configured
Device Groups.
All configured device groups are listed in the Device Groups page:
Configuration > Network > Device Groups.
After you add one or more device group(s), you can select a group and take
one of the following actions:
l Click Remove to delete the selected Device Group List entry.
l Click View Details to see the device group parameters.
l Click Modify to change the parameters of the selected device group.
Add new Device
Group
To add a new device group, click the Add new Device Group link and see
Adding and Modifying Device Groups on page 289
.
Table 143: Generic Application Enforcement Profile tab Parameters
Attributes tab
Figure 263: Generic Application Enforcement Attributes tab