Users Guide

278 | Enforcement DellNetworking W-ClearPassPolicy Manager 6.3 |User Guide
Parameter Description
Action: Disabled.
Device Group
List:
Select a Device Group from the drop-down list. The list displays all configured
Device Groups.
All configured device groups are listed in the Device Groups page:
Configuration > Network > Device Groups.
After you add one or more device group(s), you can select a group and take
one of the following actions:
l Click Remove to delete the selected Device Group List entry.
l Click View Details to see the device group parameters.
l Click Modify to change the parameters of the selected device group.
Add new Device
Group
To add a new a device group, click the Add new Device Group link and see
Adding and Modifying Device Groups on page 289
.
Table 153: SNMP Based Enforcement Profile tab Parameters (Continued)
Attributes tab
Figure 273: SNMP Based Enforcement Attributes tab
Parameter Description
Attribute Name:
Select from:
l VLAN ID
l Session Timeout (in seconds)
l Reset Connection (after the settings are applied)
Attribute Value:
The options displayed for the Attribute Value depend on Attribute Name that
was selected.
Table 154: SNMP Based Enforcement Attributes tab Parameters
TACACS+ Based Enforcement
Use this page to configure profile, service, and attribute parameters for the TACACS+ Based Enforcement Profile.
Profile tab
Figure 274: TACACS+ Based Enforcement Profile tab