Users Guide

Parameter Description
Device Group
List:
Select a Device Group from the drop-down list. The list displays all configured
Device Groups.
All configured device groups are listed in the Device Groups page:
Configuration > Network > Device Groups.
After you add one or more device group(s), you can select a group and take
one of the following actions:
l Click Remove to delete the selected Device Group List entry.
l Click View Details to see the device group parameters.
l Click Modify to change the parameters of the selected device group.
Add new Device
Group
To add a new a device group, click the Add new Device Group link and see
Adding and Modifying Device Groups on page 289
.
Table 157: VLAN Enforcement Profile tab Parameters (Continued)
Attributes tab
Figure 277: VLAN Enforcement Attributes tab
Parameter Description
Type:
Select one of the following attribute types:
l Radius:Aruba
l Radius:IETF
l Radius:Cisco
l Radius:Microsoft
l Radius:Avenda
For more information, see "RADIUS Namespaces" on page 458
Name:
The options displayed for the Name Attribute depend on the Type Attribute that
was selected.
Value:
The options displayed for the Value Attribute depend on the Type Attribute and
Name Attribute that were selected.
Table 158: VLAN Enforcement Attributes tab Parameters
Configuring Enforcement Policies
One and only one Enforcement Policy can be associated with each Service. Enforcement policies can be added in one
of two ways:
l From the Configuration > Enforcement > Enforcement Policies.
l From the Configuration >Services page as part of the flow of the Add Service wizard.
Dell Networking W-ClearPass Policy Manager 6.3 | User Guide Enforcement | 281