Users Guide

306 | Policy Simulation Dell Networking W-ClearPass Policy Manager 6.3 |User Guide
Parameter Description
Server:
Select Local or Remote.
CPPM IP Address or FQDN
NOTE: This field is only displayed if Remote Server is
selected.
Enter the IP Address or FQDN of the remote CPPM server.
Port:
NOTE: This field is only displayed if Remote Server is
selected.
Enter the port number of the remote CPPM server. The
default port number is 1812.
Shared Secret:
NOTE: Only displayed if Remote Server is selected.
Enter the shared secret between the target CPPM and this
node. You must add the node as a Network Device on the
target CPPM server.
Shared Secret This field is only displayed if Remote Server is selected.
NAS IP Address (optional):
Enter the IP address of the network device to populate the
NAS-IP-Address attribute in a RADIUS request.
NAS Type: Select the type of network device to simulate in terms of
RADIUS attributes in the request. The NAS types are:
l Aruba Wireless Controller
l Aruba Wired Switch
l Cisco Wireless Controller
l Generic
Table 182: RADIUS Simulation tab Parameters