Users Guide

Parameter Description
Select Server Specify the server for which to configure logs.
Number of
log files
Specify the number of log files of a specific module to keep at any given time. When a
log file reaches the specified size (see below), Policy Manager rolls the log over to
another file until the specified number of log files is reached; once log files exceed this
number, Policy Manager overwrites the first numbered file.
Limit each log
file size to
Limit each log file to this size, before the log rolls over to the next file.
Syslog Server
Syslog Port
Specify the syslog server and port number. Policy Manager will send the configured
module logs to this syslog server.
Service
Name
Enable
Syslog
Syslog Filter
Level
For each service, you can select the Enable Syslog check box and then override the
Syslog Filter level. The current Syslog Filter level is based on the default log level
specified on the Service Log Configuration tab.
Restore
Defaults/Save
Click Save to save changes or Restore Defaults to restore default settings.
Table 199: Log Configuration System Level tab Parameters
Server Configuration
The Policy Manager Server Configuration page (Administration > Server Manager > Server Configuration) provides
the following configuration options:
l "Editing Server Configuration Settings" on page 332
l "Set Date & Time" on page 351
l "Change Cluster Password" on page 353
l "Manage Policy Manager Zones" on page 354
l "NetEvents Targets" on page 355
l "Virtual IPSettings" on page 355
l "Make Subscriber" on page 356
l "Upload Nessus Plugins" on page 357
l "Cluster-Wide Parameters" on page 357
l "Collect Logs" on page 362
l "Backup" on page 363
l "Restore" on page 364
l "Shutdown/Reboot" on page 365
l "Drop Subscriber" on page 365
Dell Networking W-ClearPass Policy Manager 6.3 | User Guide Administration | 331