Users Guide

432 | Command Line Interface Dell Networking W-ClearPass Policy Manager 6.3 |User Guide
Flag/Parameter Description
ip <mgmt|data> <ip
address>
Network interface type: mgmt or data
l Server ip address.
netmask <netmask
address>
Netmask address.
gateway <gateway
address>
Gateway address.
Table 284: IP Commands
Example
[appadmin]# configure ip data 192.168.5.12 netmask 255.255.255.0 gateway 192.168.5.1
timezone
Configures time zone interactively.
Syntax
configure timezone
Example
[appadmin]# configure timezone
configure timezone
*********************************************************
* WARNING: When the command is completed Policy Manager services *
* are restarted to reflect the changes. *
*********************************************************
Continue? [y|Y]: y
Network Commands
The Policy Manager command line interface includes the following network commands:
l "ip" on page 432
l "nslookup" on page 433
l "ping" on page 434
l "reset" on page 434
l "traceroute" on page 435
ip
Add, delete, or list custom routes to the data or management interface routing table.
Syntax
network ip add <mgmt|data> [-i <id>] <[-s <SrcAddr>] [-d <DestAddr>]>
Add a custom routing rule. Where: