Users Guide

Parameter Description
Session ID: The Session ID is a Unique ID associated with a request.
User Session ID: A session ID that correlates authentication, authorization and
accounting records.
Start and End Timestamp: Start and end time of the session.
Username: Username associated with this record.
Client IP: The IP address and tty of the device interface.
Remote IP: The IP address from which Admin is logged in.
Flags: Identifier corresponding to start, stop or update accounting record.
Privilege Level: Privilege level of administrator: 1 (lowest) to 15 (highest).
Authentication Method: Identifies the authentication method used for the access.
Authentication Type: Identifies the authentication type used for the access.
Authentication Service: Identifies the authentication service used for the access.
Table 14: TACACS+ Accounting Record Request tab Parameters
OnGuard Activity
The OnGuard Activity screen shows the realtime status of all endpoints that have DellW-OnGuard persistent or
dissolvable agent, at: Monitoring > Live Monitoring > OnGuard Activity. This screen also presents configuration
tools to bounce an endpoint and to send unicast or broadcast messages to all endpoints running the OnGuard agent.
Endpoint bounce only works with endpoints that run the persistent agent.
For more information, see:
l "Bounce an Agent (non-SNMP)" on page 50
l "Bounce a Client Using SNMP" on page 51
l "Broadcast Message" on page 52
l "Send a Message" on page 52
Dell Networking W-ClearPass Policy Manager 6.3 | User Guide Monitoring | 49