Users Guide

Parameter Description
Select
Authentication
Source
Select any available Authentication Source from the list, the information updated in
the Authentication and Enforcement Details tabs will be auto-populated.
Active
Directory
Name
Enter the active directory name. This field is mandatory.
Description Enter a description that helps you to identify the characteristics of this template. This
field is mandatory.
Server Enter the hostname or the IP address of the Active Directory server. This field is
mandatory.
Identity Enter the Distinguished Name (DN) of the administrator account. This field is
mandatory.
NETBIOS Enter the server Active Directory domain name. This field is mandatory.
Base DN Enter DN of the node in your directory tree from which to start searching for records.
This field is mandatory.
Password Enter the account password. This field is mandatory.
Port Enter the TCP port where the server is listening for connection. This field is mandatory.
Enforcement Details
Attribute
Name
The attributes defined in the Authentication Source are listed here. Configure an
optional enforcement policy based on the following attributes:
l Email
l Name
l Phone
l UserDN
l Company
l member of
l Title
For example, you can configure an enforcement policy for a contractor specifying that
"If Name equals <contractor_name>, then assign the [Contractor] Role."
Attribute
Value
Enter the active directory attribute value for the selected name in the Attribute
Name field.
VLAN ID Enter the Standard RADIUS-IETF VLANID.
Wired Network Settings
Select Switch Select any switch from the drop-down list.
Table 34: 802.1X Wired, 802.1X Wireless, and Dell W-Series 802.1X Wireless Service Template
Parameters (Continued)
Dell Networking W-ClearPass Policy Manager 6.4 | User Guide Services | 83