Users Guide

Parameter Description
Vendor Name Select the manufacturer of the wireless controller.
RADIUS Shared
Secret
Enter the shared secret that is configured on the controller and inside Policy
Manager to send and receive RADIUS requests.
Enable RADIUSCoA Select to enable RADIUS initiated CoA on the network device.
RADIUS CoA Port Specifies the default port 3799 if RADIUS CoA is enabled. Change this value only
if you defined a custom port on the network device.
Authentication Method
Public Username
Enter public username for EAP PEAP Public type authentication method.
Public Password Enter password for EAP PEAP Public type authentication method.
Access Restrictions
Days allowed for
access
Select the days on which network access is allowed.
Table 41: Encrypted Wireless Access via 802.1X Public PEAP Method Service Template Parameters
(Continued)
Guest Access Web Login
This service authenticates guests logging in using the Guest portal. To use this service, create a Guest Web
Login page that sets the Pre-Auth Check option to AppAuth - Check using Dell Application
Authentication. The following table describes the parameter definition of the Guest Access Web Login
service template:
Parameter Description
General
Select Prefix Select any one prefix from the existing list of prefixes. This populates the pre-
configured information in the
Service Rule
and
Guest Web Login
sections. The
Name Prefix
field is not editable.
Name Prefix Enter a prefix that you want to append to services using this template. Use this to
identify services that use templates.
Service Rule
Page name
Enter the name of the Guest Web Login page.
Guest Access Restrictions
Days allowed
for access
Select the duration in number of days to enable on which the guest users are allowed
network access.
Table 42: Guest Web Login Service Template Parameters
Dell Networking W-ClearPass Policy Manager 6.4 | User Guide Services | 93