Users Guide

100 | Services Dell Networking W-ClearPass Policy Manager 6.4 |User Guide
Parameter
Description
Type Select a service from the drop-down list that defines what type of
service can be configured.
Name Enter the name of the service.
Description Provide additional information that helps to identify what the service
does.
Monitor Mode Check this box to exclude enforcement.
More Options Check these boxes to access the category of configuration options.
Service Rule
Type Select the service rule type from the drop-down list.
Name Select the name of the service rule from the drop-down list.
Operator Select an appropriate operator from the list of operators for the data
type of the attribute. For example, you can select from BELONGS_TO,
NOT_BELONGS_TO, CONTAINS, EQUALS, and so on.
Value Select the value from the drop-down list depends on the operator
selected.
Table 47: Dell 802.1X Wireless Service - Service tab Parameters
Service Rules define a set of criteria that supplicants must match to trigger the service. Some service
templates have one or more rules pre-defined. Click on a service rule to modify its options.
If you want to administer the same set of policies for wired and wireless access, you can combine the service rule to
define one single service. The other option is to keep two services for wired and wireless access, but re-use the policy
components (authentication methods, authentication source, authorization source, role mapping policies, posture
policies, and enforcement policies) in both services.
Authentication Tab
The Authentication tab contains options for configuring authentication methods and authentication
sources. The following figure shows an example of the Authentication tab followed by parameter definition: