Users Guide

The EAP-MD5 authentication method is not supported if you use Dell Networking W-ClearPass Policy Manager in the
FIPS mode.
Parameter Description
Specify inner authentication
methods in the preferred
order
Select any method available in the current context from the drop-down
list. Functions available in this tab include:
l To append an inner method to the displayed list, select it from the
drop-down list. The list can contain multiple inner methods, which
Policy Manager sends in priority order until negotiation succeeds.
l To remove an inner method from the displayed list, select the
method and click Remove.
l To set an inner method as the default (the method tried first),
select it and click Default.
Table 71: EAP-PEAP Inner Methods tab Parameters
EAP-PEAP-Public
The EAP-PEAP-Public method is used for authenticating and providing a secured wireless guest access to the
endpoints. To provide a secured wireless guest access, the Wi-Fi Protected Access (WPA) is provided for publicly
known username and password. This ensures that every device gets a unique wireless session key that is used
to encrypt the traffic and provide secured wireless access without intruding the privacy of others though the
same username and password is shared to all devices.
The EAP-PEAP-Public method contains the following two tabs:
l General
l Inner Methods
General
The General tab labels the method and defines session details. The following figure shows an example of the
EAP-PEAP-Public - General tab followed by parameter definition:
Dell Networking W-ClearPass Policy Manager 6.4 | User Guide Authentication and Authorization | 145