Users Guide

154 | Authentication and Authorization Dell Networking W-ClearPass Policy Manager 6.4 |User Guide
Parameter Description
Name Specify the label of the authentication method.
Description Provide the additional information that helps to identify the authentication method.
Type Select the type of authentication. In this context, select PAP.
Method Details
Encryption
Scheme
Select the PAP authentication encryption scheme. The following schemes are
supported:
l Clear
l Crypt
l MD5
l SHA1
l SHA256
l NT Hash
l LM Hash
l Aruba-SSO
NOTE: The MD5 encryption scheme is not supported if you use Dell Networking W-
ClearPass Policy Manager in the FIPS mode.
Table 79: PAP - General tab Parameters
Adding and Modifying Authentication Sources
Policy Manager supports multiple authentication sources. From the Services (Configuration > Service) page,
you can configure the authentication source for a new service as part of the flow of the Add Service wizard) or
modify an existing authentication source directly (Configuration > Authentication > Sources, then click
any row in the Authentication Sources page). The following figure shows an example of the
Authentication Sources page:
Figure 118: Authentication Sources Page
After clicking Add Authentication Source from any of these locations, Policy Manager displays the Add page.
Depending on the Authentication Source selected, different tabs and fields appear.