Users Guide

234 | Posture DellNetworking W-ClearPass Policy Manager 6.4 |User Guide
Interface Parameter Description
l Engine version check
l Datafile version check
l Data file has been updated
in
l Last scan has been done
before
l Real-time Protection Status
Check
the UI.
l Select the antivirus product - Select a vendor
from the list.
l Product version check - No Check, Is Latest
(requires registration with ClearPass portal),
At Least, In Last N Updates (requires
registration with ClearPass Portal).
l Engine version check - Same choices as
product version check.
l Data file version check - Same choices as
product version check.
l Data file has been updated in - Specify the
interval in hours, days, weeks, or months.
l Last scan has been done before - Specify the
interval in hours, days, weeks, or months.
l Real-time Protection Status Check
n No Check - Dell Networking W-ClearPass
Policy Manager does not use RTP Status
value for health evaluation. This means
that the client is treated as healthy
irrespective of the value of RTP.
n On - Client is marked as healthy only if
the value of RTP status is On.
n Off - Client is marked as healthy only if
the value of RTP status is Off.
Table 127: Antivirus Page (Continued)
AntiSpyware
In the AntiSpyware page, an administrator can specify that an AntiSpyware application must be on and allows
drill-down to specify information about the AntiSpyware application. Click An Antipyware Application is On
to configure the AntiSpyware application information.
Figure 204: AntiSpyware Page (Overview Before)
When enabled, the AntiSpyware detail page appears.
Figure 205: AntiSpyware Page (Detail 1)
Click Add to specify product, and version check information.