Users Guide

Profile tab
Figure 248: Aruba Downloadable Role Enforcement Profile tab
Parameter Description
Template Select Aruba Downloadable Role Enforcement.
Name Enter the name of the profile. The name is displayed in the Name column on
the Configuration > Enforcement > Profiles page.
Description Enter a description of the profile. This description is displayed in the
Description column on the Configuration > Enforcement > Profiles page.
Type Specifies the type of authentication. In this context, RADIUS. This field is
automatically populated.
Action Click
Accept
,
Reject
, or
Drop
to define the action taken on the request. The
default action is
Accept
.
Device Group
List
Select a device group from the drop-down list. The list displays all configured
device groups. All configured device groups are listed in the Device Groups
(Configuration > Network > Device Groups) page. After adding one or
more device group(s), you can select a group and perform one of the
following actions:
l Click Remove to delete the selected device group list entry.
l Click View Details to see the device group parameters.
l Click Modify to change the parameters of the selected device group.
Add new Device
Group
To add a new device group, click the
Add new Device Group
link and see
Adding and Modifying Device Groups on page 309
.
Table 150: Aruba Downloadable Role Enforcement Profile tab Parameters
Role Configuration tab
The fields on the Role Configuration tab require that you select a link to launch a new page where you set
role configuration attributes. For example, adding a Captive Portal profile. The following figure shows an
example of the Aruba Downloadable Role Enforcement Role Configuration tab followed by parameter
definition:
Dell Networking W-ClearPass Policy Manager 6.4 | User Guide Enforcement | 269