Users Guide

Aruba RADIUS Enforcement
Use this page to configure profile and attribute parameters for the Aruba RADIUS Enforcement Profile.
Profile tab
Figure 261: Aruba RADIUS Enforcement Profile tab
Parameter Description
Template Aruba RADIUS Enforcement
Name Enter the name of the profile. The name is displayed in the Name column on
the Configuration > Enforcement > Profiles page.
Description Enter a description of the profile. The Description is displayed in the
Description column on the Configuration > Enforcement > Profiles page.
Type RADIUS. The field is populated automatically.
Action Enabled. Click Accept, Reject or Drop to define the action taken on the
request.
Device Group
List:
Select a Device Group from the drop-down list. The list displays all
configured Device Groups.
All configured device groups are listed in the Device Groups page:
Configuration > Network > Device Groups.
After you add one or more device group(s), you can select a group and take
one of the following actions:
l Click Remove to delete the selected Device Group List entry.
l Click View Details to see the device group parameters.
l Click Modify to change the parameters of the selected device group.
Add new Device
Group
To add a new device group, click the Add new Device Group link and see
Adding and Modifying Device Groups on page 309
.
Table 152: Aruba RADIUS Enforcement Profile tab Parameters
Attributes tab
Figure 262: Aruba RADIUS Enforcement Attributes tab
Dell Networking W-ClearPass Policy Manager 6.4 | User Guide Enforcement | 277