Users Guide

Parameter Description
Action Enabled. Click Accept, Reject or Drop to define the action taken on the
request.
Device Group
List:
Select a Device Group from the drop-down list. The list displays all
configured Device Groups.
All configured device groups are listed in the Device Groups page:
Configuration > Network > Device Groups.
After you add one or more device group(s), you can select a group and take
one of the following actions:
l Click Remove to delete the selected Device Group List entry
l Click View Details to see the device group parameters
l Click Modify to change the parameters of the selected device group
Add new Device
Group
To add a new a device group, click the Add new Device Group link and see
Adding and Modifying Device Groups on page 309
.
Table 168: RADIUS Based Enforcement Profile tab Parameters (Continued)
Attributes tab
Figure 278: RADIUS Based Enforcement Attributes tab
Table 169: RADIUS Based Enforcement Attributes tab Parameters
Parameter Description
Type
Select one of the following attribute types:
l Radius:Aruba
l Radius:IETF
l Radius:Cisco
l Radius:Microsoft
l Radius:Avenda
For more information, see RADIUS Namespaces on page 522
Name:
The options displayed for the Name Attribute depend on the Type Attribute
that was selected.
Value:
The options displayed for the Value Attribute depend on the Type Attribute
and Name Attribute that were selected.
RADIUS Change of Authorization (CoA)
Use this page to configure profile and attribute parameters for the RADIUS Change of Authorization (CoA)
Enforcement Profile.
Dell Networking W-ClearPass Policy Manager 6.4 | User Guide Enforcement | 289