Users Guide

Parameter Description
Shared Secret This field is only displayed if Remote Server is selected.
NAS IP Address (optional):
Enter the IP address of the network device to populate the
NAS-IP-Address attribute in a RADIUS request.
NAS Type: Select the type of network device to simulate in terms of
RADIUS attributes in the request. The NAS types are:
l Aruba Wireless Controller
l Aruba Wired Switch
l Cisco Wireless Controller
l Generic
Authentication outer method: l PAP - Authentication inner method: field is disabled.
l CHAP - Authentication inner method field: is disabled.
l MSCHAPv2 - Authentication inner method field: is
disabled.
l PEAP - Authentication inner method field: is enabled.
The selections are:
n EAP-MSCHAPv2
n EAP-GTC
n EAP-TLS*
l TTLS -Authentication inner method field: is enabled. The
selections are:
n PAP
n CHAP
n MSCHAPv2
n EAP-MSCHAPv2
n EAP-GTC
n EAP-TLS
l TLS - Authentication inner method: field is disabled.
For more information, see Authentication Namespaces on
page 515
Client MAC Address (optional) Enter the client MAC address to be populated in the
request.
Username Enter the username.
Password Enter the password.
CA Certificate (optional):
1. Click Choose File.
2. Navigate to the optional Root CA certificate that is
required to verify the RADIUS server's certificate.
3. Click Open.
4. Click Upload.
Table 203: RADIUS Simulation tab Parameters (Continued)
Dell Networking W-ClearPass Policy Manager 6.4 | User Guide Policy Simulation | 327