Users Guide

358 | Administration Dell Networking W-ClearPass Policy Manager 6.4 |User Guide
Parameter Description
Hostname Specifies the hostname of Policy Manager appliance. You do not need to enter the fully qualified
domain name in this field.
Policy
Manager
Zone
Select a previously configured timezone from the drop-down list. Click on the Policy Manager
Timezone link to add and edit timezones.
Enable Profile Enable the profile to perform endpoint classifications.
Enable
Performance
Monitoring
Enable the server to perform performance monitoring.
Enable
Insight
Enable the Insight reporting tool on this node.
NOTE:
l When the administrator enables this check box for Insight on a node in a cluster, the [Insight
Repository] configuration is updated automatically to point to the management IP of that
server.
l When this check box is enabled for other servers in the cluster, they are added as backups for
the same authentication source.
l The order of the primary and backup servers in the [Insight Repository] is same in which the
user enables Insight on the server.
Enable as
Insight
Master
In a cluster environment, you can specify that the current server as an Insight Master.
NOTE: This option is only available if Enable Insight is selected.
DHCP Span
Port
Specify the port number for DHCPspanning. This field is optional.
Management
Port: IP
Address
Specify the management interface IP address to access the Policy Manager UI. Open the
Configure Management Port page by clicking the Configure button to specify IPv4 or IPv6
address.
Management
Port: Subnet
Mask
Specify the management interface subnet mask in the Configure Management Port page by
clicking the Configure button to specify the subnet mask for IPv4 address.
Management
Port: Default
Gateway
Specify the default gateway for management interface. Open the Configure Management Port
page by clicking the Configure button to specify IPv4 or IPv6 address.
Data/External
Port: IP
Address
Specify the IP address of the data interface. All authentication and authorization requests appear
on the data interface. Open the Configure Management Port page by clicking the Configure
button to specify IPv4 or IPv6 address.
Table 222: Server Configuration System Tab Parameters