Users Guide

Figure 346: Async Network Services
Parameter Description
Post Auth
Number of request
processing threads
Set the number of request processing threads. The default value is 20 threads, and the
allowed values are between 20 and 100.
Lazy handler polling
frequency
Set the Lazy handler polling frequency. The frequency is configured in minutes. The default
value is 5 minutes, and the allowed values are from 3-10 minutes.
Eager handler
polling frequency
Set the Eager handler polling frequency. The frequency is measured in seconds. The
default value is 30 seconds, and the allowed values are from 10-300 seconds.
Command Control
CoA Delay Set the CoA Delay value. The default value is measured in seconds. The default value is 2,
and the allowed values are from 0-15 seconds.
Enable SNMP
Bounce Action
Set the Enable SNMP Bounce Action value. The default value is FALSE.
Table 224: Service Parameters tab - Async Network Services
ClearPass Network Services Options
The ClearPass Network Services parameters aggregate service parameters from the following services:
l DhcpSnooper Service
l Snmp Service
l WebAuth Service
l Posture Service
The following figure shows an example of the ClearPass Network Services - Service Parameters tab
followed by parameter definition:
Dell Networking W-ClearPass Policy Manager 6.4 | User Guide Administration | 363