Users Guide

378 | Administration Dell Networking W-ClearPass Policy Manager 6.4 |User Guide
Parameter Description
Physical
Interface
The physical port on which to create the VLAN interface. This is the interface through
which the VLAN traffic will be routed.
VLAN Name Name for the VLAN interface. This name is used to identify the VLAN in the list of
network interfaces.
VLANID 802.1Q VLAN identifier. Enter a value between 1- 4094.
The VLAN ID cannot be changed after the VLAN interface has been created.
IP Address IP address of the VLAN.
Netmask Netmask for the VLAN.
Create/Cancel Commit or dismiss changes.
Table 234: Creating VLAN Parameters
Your network infrastructure must support tagged 802.1Q packets on the physical interface selected. VLAN ID
1 is often reserved for use by certain network management components; avoid using this ID unless you know
it will not conflict with a VLAN already defined in your network.
Defining Access Restrictions
Use this function to define specific network resources and allow or deny them access to specific applications.
You can create multiple definitions. Navigate to the Network tab and click Restrict Access.