Users Guide

498 | Command Line Interface Dell Networking W-ClearPass Policy Manager 6.4 |User Guide
Syntax
show version
Example
The following example displays the Policy Manager software version and the hardware model:
[appadmin]# show version
=======================================
Policy Manager software version : 2.0(1).6649
Policy Manager model number : ET-5010
=======================================
System Commands
The Policy Manager command line interface (CLI) includes the following system commands:
l apps-access-reset
l boot-image on page 498
l gen-recovery-key
l gen-support-key on page 499
l install-license on page 499
l morph-vm
l refresh-license
l restart on page 500
l shutdown on page 501
l sso-reset
l start-rasession
l status-rasession
l terminate-rasession
l update on page 502
l upgrade on page 502
apps-access-reset
Use the apps-access-reset command to reset the access control restrictions for Policy Manager.
Syntax
system apps-access-reset
Example
The following example reset the access control restrictions for Policy Manager:
[appadmin]# system apps-access-reset
Policy Manager application access is restored
boot-image
Use the boot-image to set system boot image control options.
Syntax
system boot-image [-l] [-a <version>]
The following table describes the required and optional parameters for the boot-image command: