Users Guide

Flag/Parameter Description
-l Lists the boot images installed on the system.
-a <version> Sets the active boot image version in A.B.C.D
syntax. This field is optional.
Table 327: Boot-Image Command Parameters
Example
The following example sets the system boot image control options:
[appadmin]# system boot-image -l
gen-recovery-key
Use the gen-recovery-key command to generate the recovery key for the system.
Example
The following example generates the recovery key for the system:
[appadmin]# system gen-recovery-key
Recovery key='04U2FsdGVkX18To8NDWayziQ17LzKA17DW5y+AZvGj41c='
gen-support-key
Use the gen-support-key command to generate the support key for the system.
Syntax
system gen-support-key
Example
The following example generates the support key for the system:
[appadmin]# system gen-support-key
system gen-support-key
Support key='01U2FsdGVkX1+/WS9jZKQajERyzXhM8mF6zAKrzxrHvaM='
install-license
Use the install-license command to replace the current license key with a new one.
Syntax
system install-license <license-key>
The following table describes the required and optional parameters for the install-license command:
Flag/Parameter Description
<license-key> Specifies the newly issued license key. This field
is mandatory.
Table 328: Install-License Command Parameters
Example
The following example replaces the current license key with a new one:
[appadmin]# system install-license
Dell Networking W-ClearPass Policy Manager 6.4 | User Guide Command Line Interface | 499