Users Guide

l quit on page 510
l restore on page 510
l system start-rasession on page 511
l system terminate-rasession on page 512
l system status-rasession on page 512
ad auth
Use the ad auth command to authenticate the user against Active Directory.
Syntax
ad auth --username=<username>
The following table describes the required and optional parameters for the ad auth command:
Flag/Parameter Description
<username> Specifies the username of the authenticating
user. This is a mandatory field.
Table 333: Ad Auth Command Parameters
Example
The following example authenticates the user against Active Directory:
[appadmin]# ad auth --username=mike
ad netjoin
Use the ad netjoin command to join host to the domain.
Syntax
ad netjoin <domain-controller.domain-name> [domain NETBIOS name]
The following table describes the required and optional parameters for the ad netjoin command:
Flag/Parameter Description
<domain-controller.
domain-name>
Specifies the host to be joined to the domain.
This field is mandatory.
[domain NETBIOS name] Specifies the domain name. This field is optional.
Table 334: Ad Netjoin Command Parameters
Example
The following example joins host to the domain:
[appadmin]# ad netjoin atlas.us.dellnetworks.com
ad netleave
Use the ad netleave to remove host from the domain.
Syntax
ad netleave
Dell Networking W-ClearPass Policy Manager 6.4 | User Guide Command Line Interface | 505