Users Guide

34 | Monitoring Dell Networking W-ClearPass Policy Manager 6.4 |User Guide
Parameter Description
1 (lowest) to 15 (highest).
Authentication Method Identifies the authentication method used for the access.
Authentication Type Identifies the authentication type used for the access.
Authentication Service Identifies the authentication service used for the access.
Table 14: TACACS+ Accounting Record Request tab Parameters (Continued)
OnGuard Activity
The OnGuard Activity page shows the real-time status of all endpoints that have Dell W- OnGuard persistent
or dissolvable agent in the Monitoring > Live Monitoring > OnGuard Activity page. This page also
presents configuration tools to bounce an endpoint and to send unicast or broadcast messages to all
endpoints running the W-OnGuard agent. The following figure displays a sample OnGuard Activity page
followed by parameter definition.
Endpoint bounce only works with endpoints that run the persistent agent.
Figure 19: OnGuard Activity
Parameter Description
User
Displays the name of the user.
Host MAC
Displays the MAC address of the host.
Host IP Displays the IP address of the host.
Host OS Displays the operating system that runs on the host .
Table 15: OnGuard Activity Parameters