Users Guide

Navigation Settings
Create a new Service:
l Services >
l Add Service (link) >
Name the Service and select a
pre-configured Service Type:
l Service (tab) >
l Type (selector): MAC
Authentication >
l Name/Description
(freeform) >
l Upon completion, click
Next to configure
Authentication
Table 364: MAC Authentication Service Navigation and Settings
2. Set up Authentication.
You can select any type of authentication/authorization source for a MAC Authentication service. Only a
Static Host list of type MAC Address List or MAC Address Regular Expression shows up in the list of
authentication sources (of type Static Host List). Refer to Adding and Modifying Static Host Lists on page
200 for more information. You can also select any other supported type of authentication source.
Navigation Settings
Select an Authentication Method and
two authentication sources - one of
type Static Host List and the other of
type Generic LDAP server (that you
have already configured in Policy
Manager):
l Authentication (tab) >
l Methods (This method is
automatically selected for this
type of service): [MAC AUTH] >
l Add >
l Sources (Select drop-down list):
Handhelds [Static Host List] and
Policy Manager Clients White List
[Generic LDAP] >
l Add >
l Upon completion, Next (to Audit)
Table 365: Authentication Method Navigation and Settings
3. Configure an Audit Server.
Dell Networking W-ClearPass Policy Manager 6.4 | User Guide Use Cases | 565