Users Guide

572 | OnGuard Dissolvable Agent DellNetworking W-ClearPass Policy Manager 6.4 |User Guide
1. Select the Policy-initiated - An enforcement policy will control a change of authorization option
from the drop-down list in the Login Method field. The following figure shows an example configuration of
the policy-initiated login method in the Web Login Editor page:
Figure 464: Policy-initiated Login Method
2. Select the Require a successful OnGuard health check option in the Health Check field. If you select
this field, the guest needs to pass a health check before accessing the network. Select the Native agents
only mode in the Client Agents field:
Figure 465: Native Agents Only Mode
End-to-end flow in Native Agents Only Mode
The following steps describe the end-to-end flow of the OnGuard Dissolvable Agent running on the Native
agents only mode:
1. You are redirected to the ClearPass Guest portal where you can download the native agent installer. Run the
Native Agent Installer after accepting the terms and conditions for collecting end point posture assessment
scan checks and performing remediation actions. The following figure shows an example of the Native
Dissolvable Agent Login page: