Users Guide

56 | Monitoring Dell Networking W-ClearPass Policy Manager 6.4 |User Guide
Event Viewer
The Event Viewer page provides reports about system-level events. The following figure shows an example of
the Event Viewer page followed by parameter definition:
Figure 48: Event Viewer Page (Default Values)
Parameter Description
Source Displays the source of the event. For example, AdminUI, RADIUS, SnmpService, and so on.
Level Displays the level of the event from the following options:
l INFO
l WARN
l ERROR
Category Displays the category of the event. For example, Request, Authentication, System, and so on.
Action Displays the action of the events. For example, Success, Failed, Unknown, and None.
Timestamp Displays the date and time when the event was occurred.
Table 22: Event Viewer Page Parameters (Default Values)
For more information, see:
l Creating an Event Viewer Report Using Default Values on page 56
l Creating an Event Viewer Report Using Custom Values on page 56
l Viewing Report Details on page 57
Creating an Event Viewer Report Using Default Values
1. In the Filter field, select Source as the filter parameter.
2. Leave contains field with the default term.
3. Leave the text field blank.
4. Leave the Show records value at 10.
5. Click Go. The systems returns all event records.
Creating an Event Viewer Report Using Custom Values
1. Click the icon. A new Filter field is added. You can add up to four Filter fields.