Administrator Guide

Figure 94 Authentication Sources General Page
3. Enter the values for these parameters as described in Table 15.
Table 15: General Parameters for an AD Authentication Source
Parameter Action/Description
Name 1. Enter the name of the Active Directory authentication source.
Description
2. Provide the additional information that helps to identify the Active Directory
authentication source.
Type 3. If not already selected, select Active Directory.
Use for Authorization
When Use for Authorization is enabled, W-ClearPass can use this authentication
source to fetch role-mapping attributes. This option is enabled by default.
Authorization Sources
Specifies additional sources from which role-mapping attributes may be fetched.
4. Select a previously configured authentication source from the drop-down list.
5. To add authentication source to the list of authorization sources, click Add.
To remove the authentication source from the list, click Remove.
If Policy Manager authenticates the user or device from this authentication source, it
also fetches role mapping attributes from these additional authorization sources.
Dell Networking W-ClearPass Deployment Guide Preparing for Active Directory Authentication | 103