Administrator Guide

Figure 135 Drop Subscriber Node Confirmation Options
You may optionally choose to enable the following Drop Subscriber Node options:
n Drop a node even if it's down.
n Do not reset the database on the dropped node.
n Do not back up the existing databases before this operation.
5. Click the check box for each confirmation option you wish to enable, then click Yes.
The subscriber node is removed from the cluster.
Rejoining a Node Back Into the Cluster
You can rejoin a cluster node that is currently in the Disabled state back into to the cluster.
To rejoin a disabled node back into the cluster:
1. Navigate to the Administration >Server Manager > Server Configuration page.
Figure 136 shows that one of the subscribers in the cluster is disabled.
Figure 136 Server Configuration Page Showing Disabled Cluster Node
2. Select the disabled subscriber node that you want to rejoin the cluster.
The Server Configuration >System dialog appears for the selected node. As shown in Figure 137, the
dialog includes the Join server back to cluster option.
Dell Networking W-ClearPass Deployment Guide Deploying W-ClearPass Clusters | 151